Set Connector ************* Damping ------- Sets the damping coefficent (*C* for springs and *Ctor* for torsional springs). Applicable to springs and torsional springs. Stiffness --------- Sets the stiffness value (:term:`K` for springs and :term:`Ktor` for torsional springs). Applicable to springs and torsional springs. Initial angle -------------- Sets a torsional spring's initial angle (*A0*). Applicable to torsional springs only. Initial length --------------- Sets a spring's initial length (*L0*). Applicable to springs only. Motor speed ------------- Adjust a motor's or pin joint's motor speed. Applicable to motors and pin joints. .. Note:: Pin joints can be motorized by setting their *enableMotor* attribute to *True* and *rpm* attribute to a non-zero value. Lower limit ------------ Sets the lower angle limit. Applicable to motors, torsional springs, and pin joints. Upper limit ------------- Sets the upper angle limit. Applicable to motors, torsional springs, and pin joints. Body1 X-Y ---------- Sets :term:`b1x` and/or :term:`b1y`. Body2 X-Y ---------- Sets :term:`b2x` and/or :term:`b2y`. Break Force ------------- Sets the :term:`break force`. Applicable to all :term:`connector types` but welds, beams, and belts. Break Torque ------------ Sets the :term:`break torque`. Applicable to motors and torsional springs.